Pre Cleaner is designed to cater to the pre-cleaning requirements for all types of grain processing industry. These are equipment intended to remove foreign particles such as stones, immature grains, and other impurities from the input prior to the processing of the grains
• With inlet with feed roll, pre-aspiration, tail aspiration and waste outlet on the right hand side (while viewing from feed end)
• With 1 sieve boat with 1 short scalping screen layer (1 screen part), 1 long grading screen layer (2 screen part) and 1 long sand screen layer (3 screen part)
• With built-on fan, firm drive & motors.
• Inclusive one set of screens (field perforated) + ball frames.
Technical Data | UOM | PC-600 | PC-800 | PC-1000 | PC-1500 |
Screen size L= 1000mm x W mm | mm | 600 | 800 | 1000 | 1500 |
Screen Area | m 2 | 3.00 | 4.00 | 5.00 | 7.50 |
Motor, Fan | HP | 5.0 | 5.0 | 7.5 | 7.5 |
Motor, Sieve boat | HP | 1.5 | 1.5 | 1.5 | 2.0 |
Air Volume | m 3 /hr | 5000 | 5000 | 6500 | 8000 |
Cyclone dia (not in our scope) | mm | 950 | 950 | 1200 | 1400 |
Net Weight approx. | kg | 500 | 550 | 850 | 1450 |
No. of Rubber Balls / Machine | pcs | 280 | 420 | 420 | 700 |
Length of Bottom Frame | mm | 2700 | 2700 | 2700 | 2700 |
Width of Bottom Frame | mm | 810 | 1010 | 1210 | 1710 |
Machine Ht. without fan | mm | 2050 | 2050 | 2050 | 2050 |
Fan Height | mm | 825 | 850 | 715 | 745 |
Capacity * Pre-cleaning (On Wheat Basis) | Ton/Hr | 8-12 | 15-20 | 20-30 | 40-50 |
Capacity * Pre-cleaning (On Paddy Basis) | Ton/Hr | 3-5 | 5-8 | 8-10 | 12-15 |
Capacities are based on wheat at max 18% moisture content and may vary depending on the amount of waste material.