Pre-Cleaner
The Pre-Cleaner is intended to master the pre-cleaning problems at intake plants. It is also ideal to dress malting barley and milling grain to the highest quality commercial sample at a reduced throughput.
• With inlet with feed roll, pre-aspiration, tail aspiration and waste outlet on the right hand side
(while viewing from feed end)
• With 1 sieve boat with 1 short scalping screen layer (1 screen part), 1 long grading screen layer
(2 screen part) and 1 long sand screen layer (3 screen part)
• With built-on fan, firm drive & motors.
• Inclusive one set of screens (field perforated) + ball frames.
Technical Data | UOM | PC-600 | PC-800 | PC-1000 | PC-1500 |
Screen size L= 1000mm x W mm | mm | 600 | 800 | 1000 | 1500 |
Screen Area | m 2 | 3.00 | 4.00 | 5.00 | 7.50 |
Motor, Fan | HP | 5.0 | 5.0 | 7.5 | 7.5 |
Motor, Sieve boat | HP | 1.5 | 1.5 | 1.5 | 2.0 |
Air Volume | m 3 /hr | 5000 | 5000 | 6500 | 8000 |
Cyclone dia (not in our scope) | mm | 950 | 950 | 1200 | 1400 |
Net Weight approx. | kg | 500 | 550 | 850 | 1450 |
No. of Rubber Balls / Machine | pcs | 280 | 420 | 420 | 700 |
Length of Bottom Frame | mm | 2700 | 2700 | 2700 | 2700 |
Width of Bottom Frame | mm | 810 | 1010 | 1210 | 1710 |
Machine Ht. without fan | mm | 2050 | 2050 | 2050 | 2050 |
Fan Height | mm | 825 | 850 | 715 | 745 |
Capacity * Pre-cleaning (On Wheat Basis) | Ton/Hr | 8-12 | 15-20 | 20-30 | 40-50 |
Capacity * Pre-cleaning (On Paddy Basis) | Ton/Hr | 3-5 | 5-8 | 8-10 | 12-15 |
*Capacities are based on wheat at max 18% moisture content and may vary depending on the amount of waste material.